Centrifugal pump, just as important as our solvedrilling
sand pump and shale shaker, is the one popularized in the whole world, and it
is also the one that makes our customers feel amazing and wonderful. Yes, it is
the fantastic one.
Today we
solvedrilling want to talk about the centrifugal pump.
 |
| 32SB Series Spray pump |
First, How Does a Centrifugal Pump Work?
To be frank, I tried
to explain this issue by my words; however, I found a better one answer from
Ask, so I just take it.
“A centrifugal pump uses an impeller as the primary
source for its pumping action then the impeller is similar to a fan with a
housing that has one small intake and a larger output, which is simply an
opening. The impeller is then connected to a spinning rotor that must be moved,
either with human or mechanical power, in order to displace fluid, and for the
impeller is inside a housing that lets fluid escape to a discharge pipe, where
the fluid is pushed after being displaced by the impeller.”
Second, How to Prime a Centrifugal Pump?
“Centrifugal pumps utilize centrifugal force to push
water through plumbing systems. A centrifugal pump spins an impeller at fast
speeds which sucks in water, then pushes the water through slots or groves to
create water flow. Centrifugal pumps need water in order to function correctly.
Priming a centrifugal pump prepares the pump for operation before it is turned
on. Priming a centrifugal pump requires filling the pump's casing with water so
the impeller does not suck air on start up.”
 |
| 2500SB Series Centrifugal Pump |
The Following are the Instructions for Centrifugal Pump.
1、Unscrew the pipe
or hose leading into the centrifugal pump and remove it. Insert a water hose
into the centrifugal pump's casing through the opening left when the pipe or
hose was removed.
2、Turn on the water
hose to start filling the centrifugal pump's casing with water. Allow the hose
to run until water begins to spill back out of the casing through the hole.
3、Shut off the water
hose and screw the centrifugal pump's pipe or hose onto the casing. Start the
pump to test for correct prime. If the pump does not catch prime, repeat the
case filling process until enough water resides in the case for the pump to
prime correctly.
After we know how a centrifugal pump works and how to
prime a centrifugal pump, now we talk something about the advantages of
centrifugal pump.
1. A centrifugal pump
takes up little floor space relative to say a plunger pump and weighs
comparatively little so minimal structural reinforcement is required for the
load bearing floor space.
2. It has a low
initial cost as well as low maintenance cost since all motion is rotary and
there are no sensitive parts such as the valves in a plunger pump.
3. No air vessels or
alleviators are required.
4. It can be keyed
directly to a power source as it generally has high working speeds and hence
needs no stepping.
5. A centrifugal pump
has the ability to handle muddy, dirty and corrosive liquids it can pump water
at temperatures of up to 400 º and circulate oil at high temperatures providing
it reaches the pump at high pressure ie. a full pressure system.
6. There is little if
any vibration and the discharge of liquid is continuous and without shock and
the flow can be controlled from full flow to no flow without shutting the pump
down or damaging the pump or pipes providing suitable switching gear has been
installed.
From above information,
we know how a centrifugal pump work; and we also knows how to prime a
centrifugal pump, as well as the advantages of the centrifugal. As a main manufactory
of centrifugal pump, sand pump, shale shaker, etc. High product quality and
amazing after-sale service is the one we Solvedrilling wanna give you.
